Made in Canada: Supporting Canadian businesses promotes the development of our economy and stronger communities. These candles are made in Ontario with beeswax from Ontario.

Recycled: Made in whole, or in part from recycled ingredients and/or with recycled materials. All beeswax scraps, including the wax left over at the end of the candle's life, can be cut into shavings and 'fed' back into your next pillar style beeswax candle.

Hand-made: Made with skilled craftsmanship and unparalleled care by dedicated artists. A commitment to reconnect with the local and human sources of our goods.

Natural: Made with non-toxic ingredients safe for your health and for the environment. These candles are made from 100% Cappings Beeswax, with no paraffin whatsoever.

Healthy Home: Your path to a healthy home environment, from the way you clean, to the air you breathe and the water you drink. These candles will actually clean your air, emitting negative ions scientifically proven to remove dust, pollen, odours, toxins, molds and viruses from the air.

These "drip" style beeswax candles are non-allergenic, non-toxic and burn beautifully with a golden halo and no smoke. They are a particularly smart addition to any living room, burned or not!

Beeswax is the only fuel known to modern science to produce a negative ion, which when burned, purifies the air.

Why burn beeswax and not paraffin? Beeswax is made from the nectars and pollens of Mother Nature with the assistance of the ever-so-special bee.

Paraffin, on the other hand, is a by-product of the Petroleum industry. It starts out as a grayish sludge that is bleached (creating dioxins), textured using carcinogenic chemicals, coloured with artificial colourants and finally scented with synthetic aromas that create floral carbons when burned.

Available Colour: natural "golden"

Burn Times and Dimensions:

CG1: 80-100 hrs / 2.5" X 3.5"
CG2: 150-180 hrs / 2.5" X 6"
CG3: 250-300 hrs / 2.5" X 11"

TL5: 150-180 hrs / 3.5" X 3"
TL6: 250-300 hrs / 3.5" X 6"
TL7: 500-700 hrs / 3.5" X 8.5"
TL8: 900-1000 hrs / 3.5" X 13"

EF10: 1600-2000 hrs / 4.5" X 10"
EF11: 2500-3000 hrs / 4.5" X 15"

TRP14: 4500-5000 hrs / 7.5" X 13"

Click on the drop down menu below for availability and pricing. Please note that larger candles will take slightly longer to fulfill, as they are not regular stock.

100% Cappings beeswax. Cappings are the thin layer of pure beeswax which seal in the fresh honey into each comb. Beekeepers remove this to extract the honey. By law, there can be as little as 10% beeswax in a candle and it can be sold as 'Pure Beeswax'. Generic yellowy-yellow beeswax candles are made from comb and foundation wax which are commercially manufactured, dyed and can contain up to 30 - 40% paraffin. This wax will not burn with a golden halo, nor will it emit negative ions. These special candles burn remarkably well, however, there are a few things you need to know before becoming a Candle Master:

• Gentle Warning: Never burn paraffin candles at the same time as you burn beeswax candles, as the ions created by the beeswax will collect the black soot of the paraffin and make it all too evident on your ceilings, walls, etc.
• Lighting: The wick in these candles are quite 'substantial' and are best lit using a lighter, wooden match or barbeque lighter. 'Tilting' the candle gets 'under' the wick allowing the flame to ignite easily.
• Extinguishing: Beeswax candles should be 'put out' using a candle snuffer or better yet, by 'dunking' the wick into the pool of liquid wax and straightening it up again. (For a 'dunk stick', use a small stick, chopstick or pencil.
• When re-lighting your candle, trim the wick to 1/4" (5mm).
• The height of the wick determines the size of the flame, which affects the width to which the pool melts. The larger the flame, the wider the pool will melt. Hence, an un-trimmed (unwatched) wick WLL cause the pool to melt past the edge, creating a melt down. This creates a mess and greatly shortens the life of your candle. Each wick has been cut to the proper size when purchased.
• A Pheylonian candle with a will burn close to the edge, leave a wax wall around the perimeter (given that the wick is trimmed between 1/4' - 3/8"). This wall can be used very effectively to adjust the height of the wick, without trimming. When softened, gently push the walls into the pool of wax, using an even pressure all around (Be careful pusing in the sides, as the wax is very hot). This procedure raises the level of the pool, thus shortening the wick and allowing all of the candle to be used as fuel. Do not push too much in at first because as it melts, it can flood the wick.
• If the pool is about to melt through the side wall, immediately put it out. Let the candle cool until hardened. Then, trim the wick to 1/4" and re-light it again.

Never leave a candle burning unattended, nor burning in a draft.

Use shavings to ''top up' the pool rather than pushing the side in or trimming the wick. Do not do this with tapers, tea lites or votive candles.